打膠機如何防止膠水沉淀？
上膠機使用的膠水主要是AB膠。AB型凝膠通常有環氧樹脂、硅樹脂和聚氨酯。當膠水是黑色或深灰色時，內部將填充填料。與環氧樹脂一樣，聚氨酯凝膠通常也用凝膠填充。硅膠，如果是硅膠的比例，則填充橡膠A和橡膠B。
The glue used in the gluing machine is mainly AB glue. AB type gels usually have epoxy resin, silicone resin and polyurethane. When the glue is black or dark grey, the inside will be filled with filler. Like epoxy resin, polyurethane gel is usually filled with gel. Silica gel, if it is the proportion of silica gel, fill rubber a and rubber B.
填充物由多種成分組成，如硅粉、石英砂、石灰粉等具有導熱散熱作用的填充物，增加硬度。但是這些填充物很硬而且會沉淀，那是一層和膠水。如果涂上一層，膠水的性質會發生變化，密度也會發生變化，導致比例發生變化，導致膠水不能使用，膠水背面固化，產品被沖走不合格。
The filler is composed of many components, such as silicon powder, quartz sand, lime powder and other fillers with heat conduction and heat dissipation, which increase the hardness. But these fillings are very hard and will settle. It's a layer and glue. If a layer is applied, the nature of the glue will change, the density will also change, resulting in a change in the proportion, resulting in the glue can not be used, the back of the glue is solidified, and the product is washed away unqualified.
如何防止膠水沉淀?
How to prevent the glue from settling?
1. 添加攪拌功能到桶。啟動后，攪拌器將攪拌膠連續旋轉，防止膠液沉降。此外，攪拌棒的功能更長。如果棍子太短，夠不到底部，膠水就會沉淀下來。
1. Add the mixing function to the barrel. After startup, the agitator will continuously rotate the mixing glue to prevent the glue from settling. In addition, the function of the mixing rod is longer. If the stick is too short to reach the bottom, the glue will settle down.
2. 澆注前，請打開塑料桶，用攪拌棒或電鉆攪拌。然后倒入桶中。
2. Before pouring, please open the plastic bucket and use the mixing rod or electric drill to mix. Then pour it into the bucket.
3.你可以買一些好的膠水。好的膠水。
3. You can buy some good glue. Good glue.
4. 購買接近生產日期的膠水。膠放的時間越長，沉淀越嚴重。
4. Purchase glue close to production date. The longer the glue is placed, the more serious the precipitation is.
膠水機更好天天運轉，不要長時間使用。如果你長時間不使用它(例如，一周半)，把膠水從桶里拿出來，用酒精清洗。否則，膠水會在桶和管道中沉淀。
Glue machine had better run every day, do not use for a long time. If you don't use it for a long time (for example, a week and a half), take the glue out of the bucket and wash it with alcohol. Otherwise, the glue will settle in the barrel and pipe.
6. 為了防止沉淀，試管越短越好。管子太長，膠水容易在里面沉積。
6. In order to prevent precipitation, the shorter the tube, the better. The pipe is too long and the glue tends to deposit in it.
以上內容來自膠機小編，本文不代表本站觀點。
The above content comes from the small edition of glue machine, this paper does not represent the viewpoint of this station.
上一篇：灌膠機壓力桶的運用方法！
下一篇：如何使用點膠機做好點膠工作？
