濟南雙組份打膠機是如何解決漏氣現象的？
在現實工作中，很多用手工刮膠的時候，做出來的中空玻璃出現漏氣情況，導致產品不過關，效率很難跟上，那么
濟南雙組份打膠機是如何解決漏氣的情況的呢?
In the real work, when many hand scrape glue, the hollow glass made by hand leaks, which leads to the unqualified products and the efficiency is difficult to keep up with. So how does Jinan two-component gluing machine solve the problem of air leakage?
打開雙組份打膠機氣泵開關，電源總開關，控制臺開關，在控制臺按手動按鈕，然后在顯示屏上找到原點設定，點擊輔助原點設定，然后點擊頭部原點設定，注意原點設定時避免頭部和輔助吸盤碰撞。等設定好然后返回找到玻璃厚度設定，先是玻璃的厚度然后是鋁隔條然后還是玻璃的厚度，輸入完以后，點擊設置進入。等命令位置和當前位置數值一致即可，注意設置時傳送帶上不要有玻璃。
First, turn on the air pump switch, main power switch and console switch of the two-component gluing machine. Press the manual button on the console, then find the origin setting on the display screen, click the auxiliary origin setting, and then click the head origin setting. Pay attention to avoid collision between the head and the auxiliary suction cup when setting the origin. After setting, return to find the glass thickness setting. First, the thickness of the glass, then the aluminum spacer, and then the thickness of the glass. After input, click settings to enter. Wait for the command position to be consistent with the current position value. Pay attention to no glass on the conveyor belt when setting.
濟南雙組份打膠機然后是混交了，按桶膠按鈕，按工作選擇按鈕，然后按拍膠啟動，在按伐開，此時膠頭以出膠，等看不見白膠，以混均勻以后按伐關，在按鏈接生產線，自動，自動運行，此時可以自動打膠。
Jinan two-component gluing machine is then mixed. Press the first barrel glue button, press the work selection button, and then press the tapping button to start. At this time, the glue head will come out of the glue, and the white glue can not be seen. After mixing evenly, press the cutting off, and then press the link production line to operate automatically and automatically. At this time, the glue can be automatically applied.
濟南雙組份打膠機開始打膠要看每條邊每個角打膠是否均勻，下面說下如何調整打膠機，在屏幕上點擊返回找到密封配方，點擊進入，會顯示當前密封壓力，如果每條邊都缺膠，那么可增加壓力，壓力大膠量大，壓力小膠量就小。
Jinan two-component gluing machine starts to glue to see whether each edge and corner are evenly applied. The following is how to adjust the glue applicator. Click back on the screen to find the sealing formula. Click enter to display the current sealing pressure. If each side is short of glue, increase the pressure. If the pressure is large, the glue quantity is small.
做好中空玻璃非常簡單，只需要有一個好的雙組份打膠機，才能做出質量的產品，歡迎咨詢我們。
Good insulating glass is very simple, only need to have a good two-component glue machine, to make perfect quality products, welcome to consult us.
上一篇：濟南雙組份打膠機日常如何進行維護？
下一篇：雙組份打膠機注膠時易出現的問題
